The modular
EA rack system

Flexible configurable.
Minimal footprint.
Ideal for DC high power
applications.

Select devices and integrate into the rack

New high-performance systems are constantly being developed for the electrification of the world. Associated with this is the testing requirement for the battery packs, fuel cell stacks, solar systems or electrolysis systems (or: electrolysers). With the modular EA rack system you have the possibility to select the suitable devices for your tests and simulations and to integrate them into the modular EA rack system.

Power supplies and loads

Configure 3U, 4U and 6U devices into 42U, 38U, 24U and 15U rack systems. Combine EA-10000 and EA-10000 Industrial series programmable power supplies, bidirectional power supplies, or regenerative loads. System performance can be increased by connecting devices in parallel. In a 42U rack with 5 units of 60 kW you can reach 300 kW, for the maximum power of 3.84 MW you can connect up to 64 units in 13 racks.

EA rack systems: A lot of power. Lots of flexibility. Many advantages.

Modules & Power

  • Modular rack systems with 42U, 38U, 24U and 15U
  • Integrable devices in height units 3U, 4U and 6U
    • 300 kW in only one 42U rack with 5 units á 60 kW/6U
    • 3.84 MW in only 13 racks with up to 64 devices

Devices & Series

  • Integrable device types:
    • Programmable power supplies
    • Bidirectional power supplies
    • Regenerative electronic loads
  • Integrable series:
    • EA-10000
    • EA-10000 Industrial
    • EA-BT 20000

Efficiency & Applications

  • Minimal footprint, rack depth only 1000 mm/19″ cabinets
  • Supplied as turnkey EA rack systems
  • Ideal for DC high power applications

Maximum modularity: Configure your suitable EA rack system

Optional equipment for your EA rack systems:

  • Water cooling
  • NS Protection
  • Isolation Monitor
  • DC Contactor
  • DC Copper bar
  • Ethernet Switch

With safety reliable and efficient

Integrated safety system

Each modular EA rack system includes a safety system integrated as standard. It complies with the EN 60204-1 standard and is prepared for connection to a 3-phase 400 V mains supply. The rack systems are equipped as standard with a 2-channel emergency stop system, including an emergency stop button and door contact switches at the rear door of the 19″ cabinet. A central safety relay monitors and controls the entire safety system and switches off the redundant AC contactor if necessary. In addition, each cabinet is equipped with a lockable switch that can be used to turn the power to the devices on and off. All devices in the rack and the entire cabling of the rack system are protected by fuses.

Sustainable efficiency benefits

Autoranging
“Autoranging” is a term when a programmable DC source automatically offers a wide output range of both voltage and current to maintain full power output across a wide operation range.
> More information

Power regeneration
With an efficiency up to over 96%, the absorbed energy are feed back into the grid – Environmentally friendly and cost-saving.
> More information

7 Options for EA rack system equipment

Choose the right EA rack system equipment for your applications

01 Water Cooling

In order to be able to use the EA rack systems in as many environments as possible, they are available as air-cooled standard version and as water-cooled version.

Water cooling includes the water-cooled equipment and the pre-installed and tested water distribution system in the rack system, which allows quick and easy connection to the building services.

Choose water cooling for environments where waste heat must not be released to the immediate environment and noise must be reduced.

02 NS Protection

Network and supply protection (NS) increases safety for regenerative systems when EA rack systems are equipped with regenerative loads such as PUB, PSB, PUL or ELR. In the rack system, the NS protection from a well-known supplier monitors the grid for the feed-in of generation and regenerative plants.

The module acts on the emergency stop chain and switches off the entire rack in the event of a mains fault. Islanding (disconnection of the power grid from the connection to the larger power grid) is prevented.

03 Isolation Monitor

The EA rack system is optionally equipped with the insulation monitor of a renowned supplier. This monitors the insulation resistance of the DC output against protective earth. The module acts on the emergency stop chain and switches off the entire rack system in the event of an insulation fault. This increases the safety of the operated system.

04 DC Contactor

DC contactors are used to increase safety and are mounted between the DC output of the EA rack system and the device under test (DUT). In the rack, the DC contactors are integrated into the emergency stop chain. In the event of an emergency stop situation, the DC contactors break the connection between the rack system and the DUT. This provides clear isolation and prevents unwanted currents from flowing between the rack and the DUT.

05 DC Copper bar

DC copper busbars are used to connect the DC output of multiple devices within an EA rack system to parallelize power and increase rack performance accordingly.

A central connection point is provided to connect the DC output of the entire rack to the intended application. The DC copper busbars are supplied pre-assembled and are designed for specific applications.

06 Ethernet Switch

The 19″ Ethernet switch from a renowned supplier with 24 ports is installed in the EA rack system.
By using the switch, a multi-channel rack system can be operated via only one external Ethernet interface.

The individual devices are connected internally between the switch and the rack system’s built-in devices. This reduces the number of cables required for the supply in the system and the cabling effort in general.

07 Signal lamp

You would like to configure your EA rack system optimally for your requirements?
We will be happy to advise you.

The advantages of the rack system in 2 minutes

YouTube

By loading the video, you agree to YouTube's privacy policy.
Learn more

Load video

Device Types and Series

Cabinet Systems with 15 Height Units (15 U)

Power range up to 120 kW

Features
  • Application for battery, photovoltaics, electrolysis, fuel cell and many more
  • For 380 V, 400 V and 480 V AC
  • Programmable power supplies (PSI, PS, PU), Bidirectional Power supplies (PSB, PSBE, PUB) and regenerative loads (ELR, PUL)
  • Intuitive operation through the multilingual color TFT touch panel
  • Function generator
  • Extensive protective functions (OVP, OCP, OT, …)
  • USB, Ethernet and analog interface as standard
  • Plug & Play slot for digital interfaces
  • All interfaces galvanically isolated
  • Control software EA Power Control
  • Simulation software EA Battery Simulator
  • LabVIEW VI User Library
  • IVI driver package
  • DBC-Files
  • SCPI and ModBus protocol

Cabinet Systems with 24 Height Units (24 U)

Power range up to 150 kW

Features
  • Application for battery, photovoltaics, electrolysis, fuel cell and many more
  • For 380 V, 400 V and 480 V AC
  • Programmable power supplies (PSI, PS, PU), Bidirectional Power supplies (PSB, PSBE, PUB) and regenerative loads (ELR, PUL)
  • Intuitive operation through the multilingual color TFT touch panel
  • Function generator
  • Extensive protective functions (OVP, OCP, OT…)
  • USB, Ethernet and analog interface as standard
  • Plug & Play slot for digital interfaces
  • All interfaces galvanically isolated
  • Control software EA Power Control
  • Simulation software EA Battery Simulator
  • LabVIEW VI User Library
  • IVI driver package
  • DBC-Files
  • SCPI and ModBus protocol

Cabinet Systems with 42 Height Units (42 U)

Power range up to 300 kW

Features
  • Application for battery, photovoltaics, electrolysis, fuel cell and many more
  • For 380 V, 400 V and 480 V AC
  • Programmable power supplies (PSI, PS, PU), Bidirectional Power supplies (PSB, PSBE, PUB) and regenerative loads (ELR, PUL).
  • Intuitive operation through the multilingual color TFT touch panel
  • Function generator
  • Extensive protective functions (OVP, OCP, OT, …)
  • USB, Ethernet and analog interface as standard
  • Plug & Play slot for digital interfaces
  • All interfaces galvanically isolated
  • Control software EA Power Control
  • Simulation software EA Battery Simulator
  • LabVIEW VI User Library
  • IVI driver package
  • DBC-Files
  • SCPI and ModBus protocol

Cabinet Systems with Several Units

Power range up to 3840 kW

Features
  • 3.84 MW in only 13 racks
  • Minimal footprint
  • One common emergency stop chain

Contact form

You need more information or an individual offer? Simply send us your request via the contact form.

    I have read the privacy policy and agree to its terms and conditions

    * Required field