Application Notes

Downloads & Troubleshooting

Application Notes

Support material

AN001: PSI 9000/PSI 8000 | Step by step guide for the programming of the function manager

AN002 | Application note: Testing EV electric motor and controller

AN003 | FAQs function manager

AN004: EL3000/EL9000 | Wiring the analogue interface correctly

AN005 | SCPI command list overview for all devices with IF-Ex or IF-G1 interface card

AN008 | TCP/IP access via Ethernet card IF-E1/IF-E2

AN009 | Terms explained (step width, resolution, accuracy)

AN010 | Application examples for analogue interfaces

AN011 | Guide to create ramps for voltage slope, current slope etc. with various devices

AN012 | Electronic load FAQs

AN013 | Using two-quadrants operation (older series)

AN014 | Trouble-shoot EasySoft tools after installation

AN017 | Trouble-shoot USB-CDC driver installation problems (only for series as from 2013)

AN018 | Interface selection help for newer device series since 2014

AN019 | Compatibility of protocols & interfaces, older -> newer series

AN020 | Using power supplies as battery chargers

AN021 | Principle of the two-quadrants operation (2QO)

AN022 | Technical note Auto-Ranging: Theory of operation

AN023 | Connection of an ELR9000 energy recovery DC electronic load

AN024 | Fuel cell simulaton

AN025 | Efficient Power Supply Burn-in Using Regenerative Electronic Loads

AN026 | Zero volt operation with an electronic load

AN027 | Using Bidirectional Programmable DC Power Supplies for Battery Testing

AN030 | IT Network

AN031 | Efficiently and Easily Test Fuel Cells

Help on problems