LabView VIs

LabView VIs for current and older device series

These LabView VIs are used to control devices that are equipped with on the supported EA interface cards (IF-XX) or interface modules (IF-AB-XX) and to implement them into custom applications. Also included are an user guide and some sample VIs. Requires at least LabView 7.

Supported device series (incl. subseries):

• PSI 9000 (old series until 2012)
• PSI 9000 2U- 24U / PSI 9000 3U Slave
• PSI 9000 DT / PSI 9000 T
• EL 3000 B
• EL 3000 (from firmware version 3.0)
• EL 9000 (from firmware version 3.0)
• EL 3000 B
• EL 9000 B / EL 9000 B HP / EL 9000 B 2Q / EL 9000 B 3U Slave
• EL 9000 DT / EL 9000 T
• ELR 5000
• ELR 9000
• ELR 9000 HP Slave
• PSI 8000
• PS 8000
• PS 9000 1U/2U/3U (new series from 2014)
• PS 9000 T
• PSI 800 R
• BCI 800 R
• PS 2000 B
• PS 5000 A
• PSI 5000 A
• PSE 9000
• PSB 9000
• PSB 9000 Slave
• PSBE 9000
• PS 3000 C
• ELR 10000 4U
• PSI 10000 4U
• PSB 10000 4U

Supported interfaces:

• Series IF-XX: USB, GPIB, Ethernet (IF-E1B and IF-E2B only)
• Series IF-AB-XXX: Ethernet, RS232
• Built-in: USB, Ethernet (except for the Ethernet option for old series PS 9000 and HV 9000)
• Option 3W: GPIB

Downloads:

• Interface VI Set
  

• User guide for interface VIs *

• Installation guide (PDF)

 * CHM file, must be unpacked to and opened from harddrive, not network drive

Old versions of the EA interface cards VIs

These LabView VIs are used to control devices that are equipped with selected interface cards and to implement them into custom applications. Included is a user instruction manual and some example VIs. Requires at least LabView 7.

Supported device series:

• PSI 9000 (old series until 2012)
• EL 3000
• EL 9000
• PS 8000
• PSI 8000
• PSI 800 R
• BCI 800 R

Supported interface cards:

• USB (IF-Ux)
• RS232 (IF-Rx)
• Ethernet (IF-E1, article number 33100218) up to VI Set 3.01
• Ethernet (IF-E1B, article number 33100227) from VI Set 4.01

Downloads

• Installation guide(PDF)

• Interface VIs V2.03 (3.5MB)

•  User manual for the interface VI set V2.03 (also included in the VI set) *

• Interface VIs V 3.01 (4.4MB)

• User manual for the interface VI set V3.01 (also included in the VI set) *

•  Interface VIs V 4.01 (4.6MB)

• User manual for the interface VI set V4.01 (also included in the VI set) *

• Interface VIs V4.02 (4.6MB)

• User manual for the interface VI set V4.02 (also included in the VI set) *

• Interface VIs V5.01 (9.1MB)

• User manual for the interface VI set V5.01 (also included in the VI set) *

• Interface VIs V5.02 (11.2MB)

• User manual for the interface VI set V5.02 (also included in the VI set) *

• Interface VIs V5.03 (14.2MB)

• User manual for the interface VI set V5.03 (also included in the VI set) *

* Note: CHM fileunpack to harddrive, not to network drives

LabView VIs for UTA12 adapter

Contains LabView VIs to implement and control the UTA interface hardware, as well as instructions and a example file. Requires LabView 7 or higher.

Downloads:

• UTA12 VIs v2.03

• User manual for the UTA12 VIs

LabView VIs for IEEE option in PS 9000 / BFC 2000

Contains LabView VIs (=driver) to control the IEEE option of our older power supplies (series PS 9000 or HV 9000 with built-in GPIB interface PSP5612) or electronic load BFC 2000, as well as an english instruction manual.

Note: Not for use with the newer GPIB interface card IF-G1!

Downloads:

• IEEE VIs for LabView 5.1.1 - 6

• IEEE VIs for LabView 7.0 or newer